Inverter wire welder Cevik CE-PROMIG323/SG
The inverter wire welder CE-PROMIG323/SG, multi-process MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift microprocessor controlled. It is especially suitable for bodywork and allows the immediate use of three different torches, two traditional and one Spool Gun. This feature allows direct intervention on different materials without changing wire coil torches.
The traditional mig torches are dedicated to welding steel, of high-resistance steels HSS, of stainless steel and the welding of zinc-coated sheets while the Spool Gun torch is specific for aluminum even at a long distance from the generator. The fast SYNERGIC regulation of the welding parameters thanks to the ONE TOUCH LCD SYNERGY technology, makes the product very simple to use.
La ATC technology allows to obtain with great excellent weldability in thin thicknesses, thanks to advanced arc control. Furthermore it is possible intervene manually on the arc length: this adjustment will allow to modify the shape of the welding bead depending on the style of the welder. The ONE TOUCH LCD graphic display allows a better reading of all welding parameters.
Features
- 17 synergic curves prepared
- LCD display of the welding parameters
- Regulations: wire rise ramp, electronic inductance, final wire length (burn-back), post gas
- Selection of 2/4-stroke operation, spot
- Thermostatic protection.
- Equipped with 2 MIG-MAG torches, spool gun, cable and ground clamp.
Specifications
- Type of welder Multiprocess MIG-MAG/MMA/TIG-DC-LIFT
- Type of welding 2 Torches / Synergic-Manual
- Regulation 20-220 Amps
- Maximum no-load voltage 78V
- Single-phase mains voltage 230V/50-60Hz
- D. Aluminum Wire 0.8-1.0 mm
- D. Steel Wire 0.6-1.0 mm
- D. Stainless Steel Wire. 0.8-1.0mm
- D. Core Thread 0.8-1.2 mm
- D. Copper solder wire 0.8-1.2 mm
- Electrodes 1.6-4.0mm
- Protection index IP23
- Weight Kg 52
- Dimensions 87 x 53 x 116,5 cm
Reviews
Not yet reviewed