Rotovator milling machine Deleks PAVO-160
El rotary milling machine Deleks PAVO-160 it breaks up the floor of the warehouses, thus avoiding the compaction and hardening of the material used to make the bed. his sneakers mix and stir all the layers of the framework and distribute the dry chips on the surface. The objective is get the bed clean that has remained under the feces to the surface, providing the chickens with the comfort of the first days. The wet part is mixed and because of the greater weight falls to the ground to be covered for the drier and lighter part. This strongly reduces the formation of odors, the presence of insects and the strong smell of ammonia.
Machine deals out all kinds of farm beds of chickens and poultry efficiently and quickly. The speed of intervention allows remove the entire bed in one day. The working speed is averagely 3-4 km / h, but it depends on the type of material, the hardness of the superficial crust and the depth of work. The animal thus comes to live in a clean and dry place with few unpleasant odors and with great benefit for the farmer in terms of:
- Quality of production cycle management
- Lower risk of infections
- Well-being for the operators who work inside the ships
- Saving time and work
Equipment:
- Counter-rotating rotor with 4 right angle tillers in each section
- Height-adjustable skids, which position the hoes a few millimeters from the bottom, allowing complete chip dumping
- Chain Side Drive
- Trastero roller to level the mixed material and improve the burial of wet soil.
- Thick rubber front protection to prevent blade contact with poultry
- Mechanical displacement (120mm) of the hitch 3 points cat.1
- Transmission 540 r/min
- Storage panel that can be opened for cleaning
- Transmission shaft CE cat.4X700mm
FEATURES | METRIC UNIT |
---|---|
Total width | 1650.0 mm |
Weight : | 300.0 kg |
Total height | 900.0 mm |
tractor power | 30 – 50 hp |
hitch 3 points | Cat. 1 (ø 19.0-22.0mm) |
Gearbox position | Central |
Distance between bottom points | 400.0 - 540.0 mm |
Total length | 800.0 mm |
rotor: diameter | 64.0 mm |
Rotor: blade thickness | 10.0 mm |
Transfer | Chain |
Working width | 1550.0 mm |
Working depth (min/max) | - |
Gap between gearbox and ground | 470.0 mm |
gimbals | CE 4×800mm |
Rotor: diameter with blades | 415.0 mm |
Rotor: type of bearings and dimensions | “GB276-6306(R) GB276-6209(L)” |
Rotor: No. of sections | 9 |
Number of blades in each section | 4 |
Number of blades | 32 |
Slats: height/ width | |
Blades: height/width | 170.0 / 65.0 mm |
Slats: curved extension | |
Blades: curved extension | 255.0 mm |
Slats: distance between holes | |
Blades: distance between holes | 45.0 mm |
Slats: hole diameter | |
Blades: hole diameter | 13.0 mm |
Slats: thickness | |
Blades: thickness | 6.0 mm |
Gearbox | Lombarda Ingranaggi 540 r/min (3 year warranty) |
side scrolling | 120.0mm manual |
PTO rotation direction | right side |
spindle speed | 216 rpm |
box oil | yes/ SAE 120 – ISO 72925 |
Slats: weight | |
blades: weight | 770.0 g |
packing dimension | 1000.0 * 1850.0 * 900.0 mm |
Accessories
Reviews
Not yet reviewed