This generator set belongs to the GSW Series of the PRAMAC brand. This translates into good performance and reliability for professional use such as construction and construction. This is achieved by combining power, reliability and efficiency.
The PRAMAC GSW110I generator set has a brand diesel engine FPT Iveco NEF45TM2A 4500 cc and with a maximum power of 86,97 kW. The capacity of its tank is 240 liters of fuel and its weight is 1145 Kg.
Características técnicas:
- Nominal power:
- LTP emergency power: 108,71 kVA / 86,97 kW
- PRP continuous power: 98,88 kVA / 79,10 kW
- Engine:
- Brand: FPT Iveco
- Model: NEF45TM2A
- Exhaust emission optimized for 97 / 98 50 Hz (COM): Stage II
- Cooling system: Water
- Number of cylinders and arrangement: 4 in line
- Cilindrada: 4500 cc
- Aspiration: Turbo-aftercooler
- Speed regulator: Mechanical
- PRP Gross Prime Power: 89,3 kW
- Maximum LTP power: 98 kW
- Oil capacity: 12,8 liters
- Lube oil consumption: 0,1%
- Coolant capacity: 18,5 liters
- Fuel: diesel
- Specific fuel consumption at 75% PRP: 203,5 g / kWh
- Specific fuel consumption in PRP: 207,7 g / kWh
- Start System: Electric
- Engine starting capacity: 3 kW
- Electric circuit: 12 V
- Alternator:
- Alternator: Leroy Somer
- Model: TAL044D
- Voltage: 400V
- Frequency: Hz 50
- Power factor: 0.8 cos Ø
- Poles: 4
- Type: Brushless
- AVR standard regulation: R180
- Voltage tolerance: 1%
- Efficiency at 75% load: 90,8%
- Class: H
- IP Protection: 23
- Size:
- Length: 220 cm
- Width: 100 cm
- Height: 174,3 cm
- Weight: Kg 1145
- Fuel tank capacity: 240 liters
- Fuel tank material: Metal
- Endurance:
- Fuel consumption at 75% PRP: 16,26 l / h
- Fuel consumption at 100% PRP: 22,08 l / h
- Autonomy at 75% PRP: 14,76 h
- Autonomy at 100% PRP: 10,87 h
- Current:
- Battery capacity: 140 Ah
- Maximum intensity: 156,92 A
- Miniature circuit breaker: 160 A
- Control panel available:
- Manual control panel MCP:
- Voltmeter (1 phase)
- Ammeter (1 phase)
- Hour counter
- Start / stop switch with key (Includes glow plugs for preheating)
- Emergency stop button
- Protection with alarm:
- Low fuel level
- Battery Charger Failure
- Low oil pressure
- High engine temperatures
- Grounding
- Protection with machine shutdown:
- Low fuel level
- Battery Charger Failure
- Low oil pressure
- High engine temperature
- 3 thermal pole magnet
- Emergency stop button
- Automatic control panel ACP:
- Generator voltage (3 phases).
- Mains voltage
- Generator frequency
- Generator current (3 phases).
- Battery voltage.
- Power (kVA - kW - kVAr).
- Power factor cos φ.
- Account-hours.
- Rpm engine speed
- Fuel level (%).
- Motor temperature (depending on the model)
- Selector for four operation modes: Off - Manual start - Automatic start, -Test automatic.
- Pushbuttons to force grid contactor or generator set contactor.
- Push buttons: start / stop, selection up / down, reset, mode / view selector.
- Remote start available.
- Battery disconnector
- Acoustic alarm
- Automatic battery charging.
- RS232 communications output.
- Password configurable for protection
- Protections with alarm:
- Engine protections: low fuel level, low oil pressure, high engine temperature.
- Group protections: high / low voltage, overload, high / low frequency, start failure, battery voltage out of limits, battery-charge failure.
- Protections with machine shutdown:
- Engine protections: low fuel level, low oil pressure, high engine temperature, low coolant level.
- Group protections: high / low voltage, overload, battery voltage out of limits.
- 3 pole protection switch.
- Grounding
- Emergency stop button
- Plug Out:
- Terminal block for connection from ACP to the LTS panel: Yes
- Modular Parallel Frame MPP:
- Network: voltage, intensity, frequency.
- KW -kVAr network: Power factor Cos f
- Generator voltage (3 phases).
- Generator frequency
- Generator current (3 phases).
- Generator set power (kVA - kW - kVAr).
- Power factor Cos f.
- kWh kVAh
- Battery voltage.
- Account-hours.
- Rpm engine speed
- Fuel level (%), engine temperature, oil pressure
- 128 × 64 pixel graphic display
- Operating modes: OFF - AMF function-Individual parallel connected to the parallel Individual connected to the network with AMF- Multiple generators interconnected in parallel
- Push button to force network breaker / Contactor or Generator switch / contactor
- Push buttons: start / stop, fault reset, up / down / page / enter multiple parallel selection and power management operation with the use of digital AVR load sharing automatic synchronization and power control (via goveroner speed or ECU)
- Power control and parallel operation with digital distribution of the AVR load.
- Automatic synchronization of power control (via speed control or ECU)
- Base import / export cargo and peak prevention
- PF voltage and control (AVR)
- Digital I / O configuration (12 / 12) and analog inputs (3)
- Integrated PLC programming functions
- Event history (up to 500 records)
- Selectable measuring range 120 / 277V and 0-1 / 0-5A
- Remote start and signal lock available
- DC system disconnect switch
- Acoustic alarm
- Automatic battery charger
- 2xRS232 / RS485 / USB communication ports
- PASSWORD configurable for the protection level
- Protection with machine shutdown:
- Engine protections: low fuel level, low oil pressure, high engine temperature
- Group protections: high / low voltage, overload, high / low frequency, start failure, battery voltage out of limits, battery-charge failure
- Others: overload, short circuit, reverse energy, ground
- Magnetothermal protection: IV motorized poles
- Emergency stop button
- Plug Out:
- Multi-pin connectors (male-female) of the control cable: 2
- Connection cable with 2 multi-pin connectors (10 m long): 1
- ETB external power terminal block
- Manual control panel MCP:
Optional gadgets:
Accessory | Custom code | Price | ||
RES | Residential exhaust GSW 65 / 80 / 110 Iveco | Sy000A0000S | 125,00 € | Add to cart |
FEC | Flexible exhaust compensator with flanges for GSW 95 to 225 Iveco | SY000A0004E | 445,00 € | Add to cart |
Reviews
Not yet reviewed