Deleks LEO-180 side hammer brushcutter
La Brushcutter Deleks LEO-180 arm arm, has a Working width of 1792 mm, which will be especially useful for land such as meadows, gardens and vineyards. For which the machine is intended.
In addition, to be able to adapt to the irregularities of the terrain, the machine has a convenient arm That allows him vary both the angle and the position of the brushcutter.
Plus, it comes with a cardan CE included.
Features
Working width | 1792 mm |
Total width | 1920 mm |
cutting height min/max | 10 - 45 mm |
Weight : | 495 kg |
Total height | 850 mm |
tractor power | 50 – 70hp |
hitch 3 points | Cat. 1-2 (ø 19 – 22mm / 25 – 28mm) |
Gearbox position | Internal |
hood height | 390 mm |
Distance between bottom points | 730 - 960 mm |
number of hammers | 28 |
Max. cutting diameter | 40-50 mm |
Total length | 1550mm (closed) |
Space between ground and transmission box | 490 mm |
Sheet thickness | 4 mm |
Sheet thickness on the sides | 6 mm |
Skid thickness | 6 mm |
Type of transmission | V-belts |
Transmission: Gearbox | GB Bologna (Italy) (3 year warranty) |
Transmission: PTO | 540 rpm |
Transmission: direction of rotation | Schedule |
Transmission: freewheel | √ |
Transmission - Rotor Speed | 2300 rpm |
Transmission: gearbox oil | Yes / SAE 120 – ISO 72925 |
Transmission - Upper Pulley Diameter | 170 mm |
Drive - Lower Pulley Diameter | 120 mm |
Transmission: number of choreas | 4 |
Transmission: dimensions of the belts | 17 x 1026 |
rotor: diameter | 108 mm |
Rotor: type of bearings and dimension | SKF6207 |
rotor: balancing | Electronic |
Rotor: blade thickness | 8 mm |
hammers: weight | 820 g |
Hammers: hole ø | 15 mm |
Hammers - Base Width | 82 mm |
Hammers: head width | 45 mm |
hammers: diagonal | 95 mm |
Roll: diameter | 140 mm |
Roll: sheet thickness | 5 mm |
Roll: type of bearings and dimension | UC205 |
ø Hydraulic cylinder A | 70 - 30 mm |
ø Hydraulic cylinder B | 65 - 25 mm |
Oil pressure min./max. | 120 - 150 bar |
optimal oil flow | 18 - 22 l/m |
hydraulic tubes | WB 400 Bar, 1/2″ Agri Standard |
gimbals | CE 5×1800mm |
Bonnet length | 630 mm |
packing dimension | 1980 x 800 x 760 mm |
Accessories
Mandatory by the customer, check oil and lubrication levels before start-up! If the merchandise cannot be verified at the time of receipt, it must be indicated on the carrier's sheet that the client is satisfied except for pending examination.
Reviews
Not yet reviewed