Block cutter Sima MAGNUM 1000
The block cutter MAGNUM 1000 It is robust and capable, providing high performance in the cutting of large blocks of thermo-clay, concrete or other construction materials, using the disc that best suits each material.
It has been designed in two versions, with powers of 5,5Kw / 7,5CV and 7Kw / 10CV for discs of 700 mm and 1000 mm.
La MAGNUM 1000 incorporates improvements such as:
- Un new triangle star starter, whose purpose is to minimize the rise in amperage in the start.
- Pressing the start button starts the motor connecting the coils in series (triangle), making it operate at 80% of its power.
- After 10 seconds, automatically, the switch connects the star motor, running at 100% throughput.
- The red button allows, in case of need, to stop the machine.
- High flow pump (up to 40 liters / minute).
- The lower zone of the bench is reinforced to make it more robust.
Gamma MAGNUM 1000 Large format block cutters. Large cutting capacity.
- Manual advance driven by steering wheel, communicates to the head a very smooth movement with minimum effort.
- Simple system for adjusting the cutting height with effective locking of the head.
- Durability. Built on a sturdy monobloc chassis mounted on four wheels for easy movement.
- Smooth and silent operation, thanks to its transmission by straps. High precision in the cut.
- It allows the cooling of the disk with water driven by the pump from the tank, or directly from the network.
- Front scroll wheels with locking brake system.
- It integrates a large water tank tray of 87 liters, removable for cleaning, and made of galvanized steel.
- Bearings designed to work in tight conditions, and thus extend the life of its components.
- All its electrical components comply with the requirements of the different applicable European Regulations.
- Maximum cutting length of up to 844 mm and maximum cutting depth of up to 420 mm.
1 valuation Block cutter Sima MAGNUM 1000