Axyra ST-6019 Well Pump - Hydraulic 4 ″ - Turbine by NORYL
The Axyra ST-6019 well pump has been designed with floating turbines to achieve greater tolerance to sand. This design is complemented by a robust stainless steel construction and Noryl turbines, which allow great resistance to abrasion.
Specifications Turbine:
Flow: | 24m3 to 50 Hz. |
Maximun working pressure: | 40 bar (400m). |
Starting Line: | from 1 / 4 to 2 |
Maximum amount of sand: | 150 g / m3 (with solids up to 2 mm in diameter) |
Working temperature of the liquid: | from 0ºC to 40ºC |
Maximum working depth: | 400 m. below the water level. |
Anti-clockwise direction of rotation: | (seen from the drive exit). |
Adapter flange to the motor: | Compliant with NEMA Standard. |
External diameter: | 95 mm (including cable protection guide). |
Liquid to be pumped: | chemically and mechanically non-aggressive. |
Agreements tests | ISO 9906 standard |
Characteristics of the turbine:
- High efficiency hydraulic body that provides maximum performance and minimum energy consumption.
- It incorporates check valve to protect the pump from water hammer.
- Compact, reliable, lightweight design and suitable for continuous horizontal and vertical work.
- Output of drive and adapter to the motor in stainless steel to improve rigidity and durability.
- AISA 304 stainless steel exterior shirt that ensures the perfect alignment of its components, increasing the useful life and avoiding operational problems.
- Diameter of drives 2 ”
- Maximum flow: 24 m³ at 50 Hz.
- Maximum working pressure: 40 bar (400m).
- Liquid working temperature: from 0ºC to 40ºC
- Maximum working depth: 400 m. below the water level.
- 150 g / m3 tolerance to sand.
- Noryl turbines resistant to abrasion.
- It incorporates a check valve to avoid water hammer.
- Maximum performance with low energy consumption.
AXYRA engine operation:
- Fluid: clean, non-aggressive waters
- Maximum liquid temperature: 35º
- Maximum immersion depth: 200 m
- Maximum start number per hour: 20
- Maximum / minimum permissible voltage: + 6% / - 10%
- Minimum coolant speed on the motor surface: 8 cm / s
- Maximum allowed distance between check valves and pump: 7m
- Mounting: Vertical and horizontal
AXYRA engine features:
- Stator: AISI 304 stainless steel, rewind type in oil bath.
- Bearings: Radial and axial, lubricated by oil.
- Its compensation membrane on dimentioned allows you an immersion of up to 200 meters.
- Motor shaft: Stainless steel.
- Pump coupling: NEMA standard splined shaft
- INOX top cover.
- Bottom cover stainless 304.
Pump Applications:
- Water supply networks.
- Water distribution and pressure equipment.
- Irrigation and sprinkling.
Reviews
Not yet reviewed